User Manual

Copy Protection
2-13
EvMove Command Line Switches
The DOS version of EvMove has the following syntax.
Note The syntax is shown in upper case for clarity; it is not case sensitive. It may be typed in
upper case, lower case or mixed upper/lower case. Items in brackets [ ] are optional
items; the brackets are not part of the required syntax.
EVMOVE [[/]?]
or
EVMOVE SOURCE DESTINATION [/B]
or
EVMOVE SOURCE DESTINATION [PRODUCT [SERIAL# [COUNT]]] [/B]
where:
/? displays help text for EvMove; the slash is optional.
SOURCE is a required value and may be any valid storage drive
letter; the drive specified must contain the product
activation files. SOURCE may be followed by a colon
( : ), but the colon is not required.
DESTINATION is a required value and may be any valid storage drive
letter; the drive specified must contain the product
activation files. DESTINATION may be followed by a
colon ( : ), but the colon is not required.
/B is an optional switch and is used to suppress the
confirmation prompt.
Note If the following switches are used, they should be filled left to right and separated by a
single space.