User Manual

Installation/Update Procedure
1-17
Running A.I. Series Software
To start the A.I. Series software:
1. Change to the directory where the A.I. Series software has been installed. (See the
table below for the default directory.)
• Type CD pathname [Enter]
2. Enter the command to run the software. (See the table below for the run
command.)
Software Package Default Directory Run Command
PLC-2/1774-PLC A.I. C:\PLC2 AB2
PLC-3 A.I. C:\PLC3 AB3
PLC-5 A.I. C:\PLC5 AB5
PLC-500 A.I. C:\SLC500 AB500
PLC-5/250 A.I. C:\PLC5250 AB5250
MicroLogix A.I. C:\MICRO MICRO