Installation Instructions Manual

Bul. 937C Transmitter Supply Converter Installation Instructions

Safety Notes

The Transmitter Supply Converter must only be operated by trained personnel in

accordance with this handbook.

The protection of operating personnel and of the system is only

ensured if the devices are used in

accordance with their intended purpose. Any other type of operation than that described in this

manual places the safety and functionality of the devices and systems connected to them in

question.

The devices may only be installed, connected, and a

djusted by electrical professionals outside the

hazardous area.

If faults cannot be eliminated, the devices must be taken out of operation and protected from being

placed in service again

inadvertently. Tampering with or making changes to the devices is

dangerous and therefore not permitted. They render the warranty void.

The responsibility for the adherence to local

safety standards lies with the operator.

Warning

Note

Attention