Installation Instructions Manual

The device supplies f
ield devices and can be connected in parallel to existing HART circuits.
The device analyzes u
p to four HART variables (PV, SV, TV, QV). Three HART
variables can be transformed into varying current signals from these four HART
variables. These signals are used to display the values via the analog inputs of the
process control system.
The device is easily configured by the use of key
pad or with the FDT configuration
software.
In addition to the current outputs, the device has two changeover contacts. These
changeover contacts can be programmed so that the changeover contacts function as
trip values for the HART variables
Bul. 937C HART Loop Converter Installation Instructions
6
Product Specifications
Function
The
HART Loop Converter is an isolated barrier suitable for intrinsically safe applications