Installation Instructions Manual

Menu Parameters Default setting Custom value
Output --- Iout3
Assignment disabled
Characteristic 4 - 20 NE43
Start value 0.000
End value 100.0
Fault current down
Output --- Rel1 *
Trip value On (selected)
Trip value --- Assignment
disabled
Trip value --- Min/Max
min
Trip value --- Trip point
80.00
Trip value --- Hysteresis
10.00
Trip value --- Operating mode
passive
Trip value --- Restart inhibit
OFF
Trip value --- Response delay
0 s
Fault message not selected
Output --- Rel2 *
Trip value On (selected)
Trip value --- Assignment
disabled
Trip value --- Min/Max
min
Trip value --- Trip point
80.00
Trip value --- Hysteresis
10.00
Trip value --- Operating mode
passive
Trip value --- Restart inhibit
OFF
Trip value --- Response delay
0 s
Fault message
not selected
Editing device data: Default settings
Bul. 937C HART Loop Converter Installation Instructions
47
Service Language ENG
Password OFF