Installation Instructions Manual

Bul. 937C HART Loop Converter Installation Instructions
Sele
cting an Assignment
The values of the H
ART variables selected here (PV, SV, TV, QV) are monitored using a
relay contact output. The number of available variables depends on the HART field
device. When disabled is selected, the relay remains constant in a de-energized state.
1.
Select the desired HART variable using the 
or  buttons.
2. Conf
irm your selection with OK.
Selecting the switching characteristics defines the switching direction and the direction
of operation. See applications.
1.
Select the switching direction mi
n or max with the  or  buttons.
2. Conf
irm your selection with OK.
3.
Sele
ct the direction of operation passive or active with the  or  buttons.
4. Conf
irm your selection with OK.
OK →
← ESC
▼ ▼
OK →
← ESC
On
OFF
▼
0 s ... 250 s
OK →
← ESC
▲▼
Mode
Delay
Restart Inhibit
passive
active
36