Installation Instructions Manual

Bul. 937C HART Loop Converter Installation Instructions
Selecting Relay Contact Output Me
nus
1.
Select the desired relay contact output using the  or 
buttons.
2.
Confirm your entry with OK.
The relay contact output me
nus trip value and fault signal are displayed.
The active menu is marked as On.
3.
If you would li
ke to activate the other menu, select this menu with  or .
4. Press
the OK button twice.
The active menu is marked as O
n. The submenu is displayed.
5. If you wo
uld like to cancel activation, press the ESC button after the first OK.
34