Installation Instructions Manual

Bul. 937C HART Loop Converter Installation Instructions

If the connection to the field device has been lost, the localization phase can be

performed with Rebuild without switching the device off and on again.

Select On

Rebuild with the  or  buttons.

2. Conf

irm your selection with OK.

The display On Rebuild flashes.

3. Pres

s the OK button.

The device searches for c

onnected field devices when booting.

4. Pres

s the ESC button once or multiple times to switch to display mode.

Current Outputs

In the Output menu, you have the option of defining current outputs 1 to 3 of the device.

The menu structure is identical for the three current outputs. Current output 1 is described

as an example. For information on relay contact outputs.

OK →

← ESC

OK →

← ESC

▼

disabled

▲▼ ▼

Iout1

OK →

← ESC

OK →

← ESC

4 - 20

unlimited

4 - 20 NE43

▲▼

▼

OK →

← ESC

▲▼

Output Assignment

Characteristic

Start Value see section

Activating Rebuild