Installation Instructions Manual

Bul. 937C HART Loop Converter Installation Instructions
Entering Numbers
At the lowest menu level of the Parameter menu,
you have the option of selecting
or entering a numerical value.
Selecting a Numerical Va
lue
1. Select the para
meter for which you want to change the numerical value.
2. Press
the OK button.
The current value flas
hes.
3.
Select a value from the list of values using the  and 
buttons.
The new value flashes. The value is not stored.
4. Confirm your sel
ection with OK.
The new value does not flash. The
value is stored.
1. Select the parameter where you want to ente
r the numerical value.
2. Press t
he OK button.
The current value flashes.
3.
To change the value in steps, press the  or  button. or
To change the value
more quickly, press and hold the  or 
button.
The new value flashes. The value is not stored.
4. Confirm your
selection with OK.
The new value is stored.
OK →
← ESC
OK ↓
← ESC
← ESC
▼ ▲ ↓
Parameter Current value, flashing
New value, flashing,
not stored
New value, not flashing,
stored
21
Entering a Numerical Value