Installation Instructions Manual

Parameterization Mode

After being switched on, the device is in display m

ode. If you have password

protection enabled, you must enter the password every time you transition from

display mode to parameterization mode.

Calling up Parameterization Mode

Press the OK and ESC buttons simultaneously for approx. 1

second.

The device changes from display mode to parameterization mode.

Exiting Parameterization Mode

1. Press the ESC once or multiple times.

The number of times depends on which menu

level you are in.

The device changes from parameterization mode to display mode.

2. If you have not pressed a but

ton for 10 minutes in parameterization mode, the device

switches back automatically to display mode.

▼ ▲

▼

HARTcom

Unit

Main menu

Output

Service

Display mode

parameterization mode

OK + ESC (simultaneously for 1 s) →

← ESC

Bul. 937C HART Loop Converter Installation Instructions

1818