Installation Instructions Owner manual

5
Bul. 937C Universal Temperature Converter Installation Instructions
20
115
111 118
Connection
The slip-off terminals significantly simplify connection and
construction of switching cabinets. They allow
quick and error-
free exchange of the unit when service is needed.
The terminals can be screwed on, are self-opening, and have
generous connection room for a wire diameter of up to 2.5 mm²
and coded plugs, so that leads cannot be confused.
Intrinsically safe field circuits are connected to the blue terminals
1 to 6 of the Universal Temperature Converter. These may be
conducted using DIN
EN 60079-14-compliant leads into the
hazardous area.
Non-intrinsically safe field circuits are connected to the black
terminals 7 to 15
of the Universal Temperature Converter.
Only one sensor can be connected to the Universal
Temperature Converter.