Installation Instructions Owner manual

14
Bul. 937C Universal Temperature Converter Installation Instructions
Diagnosis
If you have started the communication between PACTware
TM
and Bul. 937CS-AITMP-DC1
(e. g. via Device data → Establish connection), you can open the Diagnosis window via
Device data → Diagnosis. It shows the following information:
Explanations:
• Memory error: error in the memory of the Bul. 937CS-AITMP-DC1; if this error was caused by
an incorrect data transfer, you can eliminate it via Device data → Additional functions → Service
(see section Service); otherwise, please contact Rockwell Automation
• Internal device error: please contact Rockwell Automation
• Redundancy error: only if Redundancy active has been selected (see Menu Input Extras) in the case of
a lead fault at both inputs (see below)
• Simulation mode: see Simulation section