User Manual User guide

Exporting APS Documentation/Archive Files
4-7
Selecting Export Address Types
After selecting [F10] – SELECT TYPES from the export options screen, APSIE
displays the following window, labeled “Select Export Address Types.”
SLC–500 APS IMPORT/EXPORT UTILITY
Press a Function Key
EXPORT OPTIONS
Labels
ESC exits/ALT–U aborts changes
SELECT EXPORT ADDRESS TYPES
Outputs YES
Inputs NO
Status YES
Bit/Binary YES
Timer NO
Counter YES
Control NO
Integer YES
Float NO
M0 NO
M1 YES
String NO
ASCII NO
Labels YES
From this screen you select which address types in the ASCII documentation file
you want to export.
Use the up– and down–arrow cursor keys to move through the address types
displayed in the window, highlighting those types you wish to change.
Tables 4.C and 4.D provide you with two options for configuring the address types:
table 4.C explains how you can change the status of each address type one at a time;
table 4.D explains how you can configure the export utility so that all or none of the
address types are exported.
Note After you have configur ed the addr ess types, you can save the configuration
permanently by pr
essing [F9] – SA VE CONFIG fr om the Export Options window .
(Pr
ess [ENTER] or [ESC] to save the configuration for this session only .)