User Manual User guide

Importing ASCII Documentation/Archive Files
3-7
Note If the pr ocessor type is incorr ect you ar e immediately pr ompted: “Pr ocessor type
missing or incorr ect in .SLC file. Configur e I/O?, You can:
• pr ess [F8] Yes to r econfigure I/O
• pr ess [F10] No to allow the import to continue (An ar chive file will not be
created).
T
o corr ect the I/O configuration, refer to the Advanced Pr ogramming Softwar e
User Manual. (APSIE uses the same I/O configuration function as APS.)
Once the import process starts, the following screen is displayed.
Source: FILE1 Utility: Import Documentation
Destin: FILE1 Status: Importing Archive File
Phase: Line 5
Import Status Area:
These areas provide
continually updated
status information
on the performance
of the import.
BEGIN ASCII ARCHIVE IMPORT
ASCII ARCHIVE FILE OPTIONS:
IGNORE SLC ARCHIVE ERRORS: NO
PASS 1
Rockwell Software Incorporated
9323 Series Software
SLC–500 IMPORT/EXPORT SOFTWARE
Display Area:
• abort the import by pr essing [Control – C]
The information in the bottom window of the import status area provides the same
information that is stored in a log file. When the import is complete, you have the
option of viewing the log file or returning to the previous screen.
Note You
cannot download the pr ogram to a pr ocessor immediately . Y ou must first load
the newly cr eated APS archive file into APS and then save the file from the offline
editor.