USER MANUAL APS 6.0

Preface
Advanced Programming Software User Manual
5–16
SOURCE:
DESTIN:
F7F3
DEFINE
DIR
SELECT
SOURCE
Press a Function Key or Enter File Name
offline SLC 5/03 EXAMPLE
COPY COMMENTS AND SYMBOLS
PROCESSOR
ESC exits
F1
BEGIN
OPER
F4
ENTER
DESTIN
CONVEYOR
DRILL1
EXAMPLE
MIXER
ONOFF
PAINTGUN
RPMCALC
SEQUENCE
STOP_GO
TOGGLE
The window at the right is the directory of Comments and Symbols stored on disk.
The cursor is on DRILL1. The window at the left indicates the Source and
Destination of the Comments and Symbols to be copied.
2. Press
CONFIG
OFFLINE
CONFIG
SELECT
SOURCE
F3
. This enters DRILL1 as the source.
3. Press
CONFIG
OFFLINE
CONFIG
ENTER
DESTIN
F4
. Type: DRILL2 and press [ENTER].
4.
Press
CONFIG
OFFLINE
CONFIG
BEGIN
OPER
F1
. The file DRILL2 is copied into the directory.
Renaming Archive Files
The procedures for copying and renaming are the same. In the last example, if [F3],
Rename was selected, the comments and symbols would have been deleted from the
processor file DRILL1 and placed in a separate file name DRILL2.