USER MANUAL APS 6.0

Preface
P–5
Common T echniques Used in this Manual
The following conventions are used throughout this manual:
• Bulleted lists provide information, not procedural steps.
• Numbered lists provide sequential steps or hierarchical information.
• Text in this font indicates words or phrases you should type.
• Italic type is used for emphasis.
• Key names match the names shown and appear in bold, capital letters within
brackets (for example, [ENTER]). A function key icon matches the name of
the function key you should press, such as
CONFIG
OFFLINE
CONFIG
SAVE
EXIT
F3
.
The following table summarizes the conventions used to distinguish the differences
between the SLC 5/03 processor and SLC 5/04 processor keyswitch positions, the
processor modes, and the actual display on the APS status line.
When Referring
to the Keyswitch
Position
When Referring to the Processor
Mode
When Referring
to the
Status Line
RUN position Run mode RUN
Run mode REM RUN
Program mode REM PROG
REMote position
Test  Single Step mode
REM SRG
Test  Single Scan mode REM SSN
Test  Continuous Scan mode REM CSN
PROGram position Program mode PROG