USER MANUAL APS 6.0

Configuring

Your System

3–5

Selectable Address Display

You

have the option to select the method used to reference the physical addressing

of bit (data) files. Bit files include outputs (O), inputs (I), and binary (B). For each

file type, you can select between two address displays:

• Word/Bit

• Sequential

The following table shows the dif

ferences between the two types of displays:

Bit File Type Word/Bit Sequential Bit

Input

I1:2.0/10

I1:1.3/0

I1:2/10

I1:1/48

Output O0:0.1/1 O0:0/17

Binary

B3:5/10

B10:0/15

B3/90

B10/15

In addition you have the option of selecting short addressing for address display and

entry. Short addressing omits the file number and colon from the address. For

example, N13 is the short address of N7:13. See the

Instruction Set Refer

ence

Manual for more information.

Once you select the method(s) of display

, it is applied to the database editor

, create

reports function, and to the ladder display.

1. From the System Configuration display

, press

CONFIG

OFFLINE

CONFIG

ADDRESS

. The function keys

toggle between Word/Bit and Sequential address display types. See the

following figure.