USER MANUAL APS 6.0

Configuring

Your System

3–3

Intensify

• Cursor is shown as a reversed screen area (located on an instruction, rung, or

power rail).

• True instructions are shown intensified (heavier line weight).

• A true instruction at the cursor location is shown diminished (true) in a reversed

screen area (cursor).

• Enabled forces are shown as an intensified “On” or “Off.”

Note If

you ar

e using a T47 terminal or another terminal having an LCD display

, the

preferred option is REVERSE. With the INTENSIFY option, true instructions and

enabled for

ces ar

e not easy to distinguish because they ar

diminished

rather than

intensified.

Color Selection

Function key [F3], Color Select toggles the Color Selection between

MONOCHROME and COLOR.

Monochrome (Default Option)

The display varies according to the type of monochrome or LCD monitor used. If

you are using a T45 or T47 terminal or another terminal having an LCD display, you

should use the MONOCHROME option. W

ith the color option certain parts of the

display are not easy to distinguish.