USER MANUAL APS 6.0

T ransferring Program Files
21–19
4. The status line will indicate an SLC 5/02 processor . The APS terminal is now
ready to receive the program from the HHT
. Press
CONFIG
OFFLINE
CONFIG
RECEIVE
PROGRAM
F2
. The following
display appears at the APS terminal:
Press Control-C to abourt
Term. Addr: 0 Emulation: 5/02
ROCKWELL SOFTWARE INCORPORATED
9323 SERIES SOFTWARE
SLC-500 PROGRAM TRANSFER UTILITY
Waiting to Send Program...
File Name : EXAMPLE
5. Leave the previous menu displayed on the APS terminal while you set up the
HHT terminal. At this time you can press [CRTL-C] to abort the procedure.
6. To send the program file EXAMPLE, begin at the main menu on the HHT
. Press
CONFIG
OFFLINE
CONFIG
UTILITY
F5
. The following display appears:
File Name: Prog Name:
File Name Type Size(Instr)
0 System 211
1 Reserved 0
2 Ladder 15
ONLINE WHO PASSWRD CLR_MEM
F1 F2 F3 F4 F5