USER MANUAL APS 6.0

Preface
Advanced Programming Software User Manual
2–8
Online Program Directory Display
The following display appears when you enter the online mode by pressing
CONFIG
OFFLINE
CONFIG
ONLINE
F1
at the main menu.
F1 F2 F6 F7F3 F4
F8
PROCSSR
FUNCTNS
SAVE
RESTORE
CREATE
REPORTS
FILE
OPTIONS
RETURN
TO MENU
CHANGE
LNK ADR
MONITOR
FILE
Press a key, enter file number or file name
REM RUN L532 Series C Rev 2 PROC Addr 2
PROGRAM DIRECTORY FOR PROCESSOR: 05TEST SINGLE STEP TEST: DISABLED
F5
WHO
ACTIVE
F9
F10
DATA
MONITOR
MEMORY
MAP
FILE PROTECTED NAME TYPE SIZE (words)
0 system 73
1 reserved 0
2 ladder 12
3 ladder 45
The following function keys allow you complete tasks applying to the processor file
in the addressed processor .
This function key: Allows you to:
[F1] Processor Functions
change the processor mode. Copy a processor file stored in
an EEPROM to the processor memory.
[F2] Save/Restore
save a processor file to disk or restore an archive file to the
processor memory.
[F4] Change Link Address
communicate with a different node address on the DH485
network.
[F5] WHO Active
monitor the WHO Active window, change the network
configuration, monitor node and network diagnostic windows.
[F6] Create Reports specify the type of report you want to create.
[F7] File Options
rename, copy, and delete archive files. You can also copy a
file to/from a floppy.