USER MANUAL APS 6.0

Preface
Advanced Programming Software User Manual
2–6
This function key: Allows you to:
[F8] Print Reports print reports.
[F9] System Utilities
use the Prom Translator, which converts archive files to
hexadecimal format.
Also allows you to transfer a processor file between two APS
terminals or from an APS terminal to an HHT.
[F10] Exit System exit the software.
Offline Program Directory Display
The following display appears when you press
CONFIG
OFFLINE
CONFIG
OFFLINE
PRG/DOC
F3
from the previous menu.
F1 F2 F6 F7F3 F4
F8
PROCSSR
FUNCTNS
SAVE CREATE
REPORTS
FILE
OPTIONS
RETURN
TO MENU
CHANGE
FILE
MONITOR
FILE
Press a key, enter file number or file name
offline SLC 5/03 File 05TEST
PROGRAM DIRECTORY FOR PROCESSOR: 05TEST SINGLE STEP TEST: DISABLED
F9
DATA
MONITOR
F10
MEMORY
MAP
FILE PROTECTED NAME TYPE SIZE (words)
0 system 73
1 reserved 0
2 ladder 12
3 ladder 45
This function key: Allows you to:
[F1] Processor Functions
change the processor and I/O configuration;
add/delete/change a password or master password; change
the processor file name; create/delete ladder program files;
name ladder program files; and clear the processor file from
the workspace.
[F2] Save save the processor file to disk.
[F4] Change File
replace the processor file with another processor file. Also
allows you to create an archive processor file.
[F6] Create Reports create reports.
[F7] File Options
rename, copy, and delete archive files. Also allows you to
copy a file to and from disk.