USER MANUAL APS 6.0

Preface
Advanced Programming Software User Manual
16–24
Status File for SLC 5/02 Processors (Display 2)
I/O SLOT INTERRUPT ENABLES
LAST SCAN [x10 ms]: 0 0 10 20 30
00000000 00000000 00000000 00000000
AVERAGE SCAN [x10 ms]: 0
MAXIMUM SCAN [x10 ms]: 1 I/O SLOT INTERRUPT PENDING
0 10 20 30
INDEX REGISTER VALUE: 4 00000000 00000000 00000000 00000000
INDEX ACROSS FILES: NO
FAULT ROUTINE SUBROUTINE FILE: 0 I/O INTERRUPT FILE EXEC: 0
SELECTABLE TIMED INTERRUPT SINGLE STEP TEST FILE RUNG
SUBROUTINE FILE: 0 START STEP ON: 2 3
SETPOINT [x10 ms]: 0 END STEP BEFORE: 0 0
ENABLED: 1 FAULT/POWER DOWN: 2 3
EXECUTING: 0 COMPILED FOR SINGLE STEP: NO
PENDING: 0
1 ms TIMEBASE 0 STI LOST: 0
F7F5 F8
NEXT
FILE
SPECIFY
ADDRESS
Press a key or enter value, press Alt-H for help.
S:28/15 =
offline no forces formatted decimal addr File EXAMPLE
PREV
FILE
F1 F2
PAGE
UP
PAGE
DOWN
Status File for SLC 5/03 and SLC 5/04 Processors (Display 2)
LAST SCAN (x01 ms) 0 I/O SLOT INTERRUPT ENABLES
LAST SCAN [x10 ms]: 0 0 10 20 30
1 ms TIMEBASE (SCAN Times) 0 00000000 00000000 00000000 00000000
AVERAGE SCAN [x10 ms]: 0
MAXIMUM SCAN [x10 ms]: 1
I/O SLOT INTERRUPT PENDING
INDEX REGISTER VALUE: 4 0 10 20 30
INDEX ACROSS FILES: NO 00000000 00000000 00000000 00000000
FAULT ROUTINE SUBROUTINE FILE: 0 I/O INTERRUPT FILE EXEC: 0
SELECTABLE TIMED INTERRUPT SINGLE STEP TEST FILE RUNG
SUBROUTINE FILE: 0 START STEP ON: 2 3
SETPOINT [x10 ms]: 0 END STEP BEFORE: 0 0
ENABLED: 1 FAULT/POWER DOWN: 2 3
EXECUTING: 0 COMPILED FOR SINGLE STEP: YES
PENDING: 0
1 ms TIMEBASE 0 STI LOST: 1
F7F5
F8
NEXT
FILE
SPECIFY
ADDRESS
Press a key or enter value, press Alt-H for help.
S:28/15 =
offline no forces formatted decimal addr File EXAMPLE
PREV
FILE
F1
F2
PAGE
UP
PAGE
DOWN
F4
GLOBAL
STATUS
➀
➀
This function key is only available for SLC 5/04 OS401 processors.