USER MANUAL APS 6.0

Preface
Advanced Programming Software User Manual
14–4
Restoring a File
The figure below shows an APS programming terminal and an interconnected
processor. In the following example, the file EXAMPLE
replaces the online
processor file (SEQUENCE). In other words, EXAMPLE is restored.
TERMINAL
PROCESSOR 1
OFFLINE
PROCESSOR
FILE
SEQUENCE
ONLINE
PROCESSOR
FILE
SEQUENCE
ARCHIVE
EXAMPLE
SEQUENCE
TOGGLE
Workspace Hard Disk
Before going online, check to make sure that a valid program exists in your
processor.
1.
Begin at the main menu and press
CONFIG
OFFLINE
CONFIG
ONLINE
F1
. The program directory of the
online processor file SEQUENCE
appears:
F1 F2 F6 F7F3 F4
F8
PROCSSR
FUNCTNS
SAVE
RESTORE
CREATE
REPORTS
FILE
OPTIONS
RETURN
TO MENU
CHANGE
LINK ADR
MONITOR
FILE
Press a key, enter file number or file name
REM PROG L532 Series C Rev.2 PROC Addr 1
F5
WHO
ACTIVE
F9
DATA
MONITOR
F10
MEMORY
MAP
FILE PROTECTED NAME TYPE SIZE (words)
0 system 74
1 reserved 0
2 ladder 48
PROGRAM DIRECTORY FOR PROCESSOR: SEQUENCE