USER MANUAL APS 6.0

Configuring Y our Programming Device for Online Communication
11–39
Example Configuration: DF1 Full-Duplex to DH+ via 5/04 Passthru
DF1 to DH+ bridging is allowed via an SLC 5/04 OS401 processor when the
passthru bit is enabled. An example is shown below .
Processor B
SLC 5/04 processor
CH1
Node 23
(octal)
APS 6.0 or later
Node 77
(octal)
CH0
Node 2
(octal)
CH1
Node 14
(octal)
DF1 FullDuplex
Link ID=2
19,200 baud
DH+
Link ID=1
57,600 baud
Processor A
SLC 5/04 OS401 processor
S:34/5=1
To program the SLC 5/04 OS401 processors on DH+, use the DF1 full-duplex
driver
. As shown in the screens that follow , enter the destination address 19 decimal
for processor A, and enter the destination address 12 decimal for processor B.
F1 Port COM1
Current Device Full-Duplex
F4 Source Address 0
F5 Destination Address 19
F7 Device/Modem/Full-Duplex Configuration
F9 Save to File
F9
Press a function key
SAVE TO
FILE
F1
PORT
F2
SELECT
DEVICE
ESC exits/Alt-U aborts changes
ONLINE CONFIGURATION
F7
DEVICE
CONFIG
F4
SOURCE
ADDRESS
F5
DEST
ADDRESS
Screen for Processor A