USER MANUAL APS 6.0

Configuring Y our Programming Device for Online Communication
11–31
Example Configuration
The following 1784-KT parameters are read from the cfg_kt.ini file.
Current Device 1784-KT (DH+ Direct)
Connection DIRECT
Terminal Name MYKT
Terminal Address 0 (octal)
Baud Rate 57600
F5 SLC Node Address 3 (octal)
IRQ 3
Board/Memory Address 110011
F8 Curr. Interchange Port 1
F9 Save to File
F9
Press a function key
SAVE TO
FILE
ESC exits/Alt-U aborts changes
ONLINE CONFIGURATION
F8
NEXT
PORT
F5
PROC
ADDRESS
F2
SELECT
DEVICE
Function Key Description
[F2] Select Device
Toggles between the selected device driver and the device
driver selection menu.
[F5] Processor Address
Allows you to select a processor address as a node number.
Valid range is 0–77 octal. The default is 1.
[F8] Next Port
Allows you to select the port number where the interface card
is installed. Valid range is 1–8. The default is 1.
[F9] Save to File Saves the selected parameters to a user file.