USER MANUAL APS 6.0

Configuring Y our Programming Device for Online Communication
11–29
1784-KT (DH+ Direct) and 1784-KT2 (DH+ Direct) Interface Cards
Use either the 1784-KT (DH+ Direct) or 1784-KT2 (DH+ Direct) interface cards to
connect an IBM compatible or IBM PS/2 microchannel computer directly to an
SLC 5/04 processor on a DH+ link for programming. These interface cards share
the same configurable parameters.
Current Device 1784-KT (DH+ Direct)
F3 Connection DIRECT
F4 Terminal DH+ Address 0 (octal)
F5 SLC Node Address 1 (octal)
F7 IRQ 3
F8 Board Address 000011
F9 Save to File
F9
Press a function key
SAVE T0
FILE
F5
SLC
ADDRESS
F3
CONNECT
TYPE
F2
SELECT
DEVICE
F4
TERM
ADDRESS
ESC exits/Alt-U aborts changes
ONLINE CONFIGURATION
F7
IRQ
F8
BOARD
ADDRESS
Function Key Description
[F2] Select Device
Toggles between the selected interface card and the interface card
selection menu.
[F3] Connect Type
Toggles between Direct and MultiDrop. Direct means that the terminal
has a termination resistor (last device on the DH+ link). MultiDrop
means that the terminal does not have a termination resistor. The
default is Direct.
[F4] Terminal Address
Allows selection of a terminal address as a node number. Valid range is
0–77 octal. The default is 0.
[F5] SLC Address
Allows selection of a processor address as a node number. Valid range
is 0–77 octal. The default is 1.
[F7] IRQ
1784KT
Allows you to select the IRQ on the board (3, 4, 5, and 7.) The default is
3. See the 1784KT card user manual for details.
1784KT2
Allows you to select the IRQ on the board (9, 10, 11, and 12.) The
default is 9. See the 1784KT2 card user manual for details.