USER MANUAL APS 6.0

Installing the Software
1–15
;[DTL_DF1.8]
;DEVICE=DF1
;BAUD=1200
;IRQ=4
;COM_PORT=1
;NAME=DTL_KT 8
;ERROR=1
;PARITY=1
;DUPLEX=1
;[DTL_485.5]
;DEVICE=PIC
;BAUD=19200
;IRQ=4
;COM_PORT=1
;STATION=0
;octal (0 to 37)
;MAXNADDR=037 ;octal (0 to 37)
;NAME=485 PIC
The communication
port specified here
must match the
communication port
defined during
installation.
The communication
port specified here
must match the
communication port
defined during
installation.
If you use the DH485 protocol,
you must enter an octal value
for the Station Number and
Maximum Address field.