USER MANUAL APS 6.0

Configuring Y our Programming Device for Online Communication
11–25
2. Press
CONFIG
OFFLINE
CONFIG
HALF
DUPLEX
F10
. The following display appears:
F9
Press a function key
SAVE TO
FILE
F1 Master Poll Timeout (x20 ms) 50
F2 Message Retries 3
F3 RTS Send Delay (x20 ms) 0
F4 RTS Off Delay (x20 ms) 0
F5 Command Reply Timeout (X55 ms) 198
F6 Pre-send Time Delay [x1 ms] 0
F7 Stop Bits 1
F9 Save to File
Half Duplex Configuration
F3
SEND
DELAY
F5
REPLY
TIMEOUT
ESC exits/Alt-U aborts changes
F1
POLL
TIMEOUT
F2
MESSAGE
RETRIES
F4
OFF
DELAY
F6
PRESEND
DELAY
F7
STOP
BITS
Function Key Description
[F1] Poll Timeout
Allows you to select the master poll timeout value in
increments of 20 ms. The valid range is 0–65,635. The
default is 50.
[F2] Message Retries
Allows you to select the message retries value. The valid
range is 0–255. The default is 3.
[F3] RTS Send Delay
Allows you to select the RTS send delay value in increments of
20 ms. The valid range is 0–65,535. The default is 0.
[F4] Off Delay
Allows you to select the RTS off delay value in increments of
20 ms. The valid range is 0–65,535. The default is 0.
[F5] Reply Timeout
Allows you to select the reply timeout value in increments of
55 ms. The valid range is 18–25,000. The default is 198.
[F6] Presend Time Delay
Allows you to select a presend time delay in increments of
1 ms. The valid range is 0-65,535. The default is 0.
[F7] Stop Bits Toggles between 1 and 2. The default is 1.
[F9] Save to File Saves the halfduplex slave parameters to the user file.