USER MANUAL APS 6.0

Preface
Advanced Programming Software User Manual
11–24
1. Press
CONFIG
OFFLINE
CONFIG
DEVICE
CONFIG
F7
. The following display appears:
F9
Press a function key
SAVE
TO FILE
F1 Baud Rate (PC to Master) 1200
F2 Parity NONE
F3 Error Check CRC
F4 Use Modem (Flow Control) NO
F5 Dial Phone Number N/A
F6 Modem Init String N/A
F7 Phone Number N/A
F8 Auto Disconnect N/A (minutes)
F9 Save to File
F10 Half Duplex Slave Configuration
F1
BAUD
RATE
F2
PARITY
F4
USE
MODEM
ESC exits/Alt-U aborts changes
Device/Modem/Half Duplex Slave Configuration
F7
PHONE
NUMBER
F3
ERROR
CHECK
F10
HALF
DUPLEX
Select the different options by pressing the corresponding function key . Notice
that [F4] Use Modem has additional parameters associated with it. They are:
• Y es W ith Continuous Carriers
• Y es W/O Continuous Carrier
• No
The default is No.