USER MANUAL APS 6.0

Preface
Advanced Programming Software User Manual
11–12
Function Key Description
[F8] Board Address
➀
Allows you to select the board address for the 1784KT(2)
card. Valid values are A000 to D800 in increments of 400 with
the exception of B000 and BC00 (all values in hexadecimal).
The default is A000.
[F9] Save to File
Allows you to save the established parameters to a user
configuration file that APS accesses to automatically set up
these parameters the next time you use the software.
➀
Refer to either the 1784KT or 1784KT2 user manuals for more information about these parameters.
Note If initialized for a 1784-KT interface card, APS displays the message Illegal
Data or Parameter Value
during power up if any of the following are true:
• an invalid boar d addr ess is pr ogrammed
• memory allocation contention exists
• the KT module does not exist
• an invalid or previously assigned interrupt (IRQ) is selected