USER MANUAL APS 6.0

Preface
Advanced Programming Software User Manual
11–4
Device Catalog Number
Fixed,
SLC 5/01
SLC 5/02 SLC 5/03 SLC 5/04 ML 1000 Page
1747PIC
(DH485)
1747PIC Interface Converter
• • • •
➀
NA 11-6
1784KR (DH485)
1784KR Communication
Board
• • • •
➀
NA 11-8
1784KL (DH+
Bridged)
1784KL Communication
Interface Module
• • • •
NA 11-10
1784KT (DH+
Bridged)
1784KT Communication
Interface Module
• • • •
NA 11-11
KF3/KE
(FullDuplex)
1770KF3 or 1747KE
Gateway Device
• • • •
NA 11-13
FullDuplex DF1 FullDuplex Protocol NA NA
• •
NA 11-19
HalfDuplex Slave DF1 HalfDuplex Protocol NA NA
• •
NA 11-23
FullDuplex
(Micro)
DF1 FullDuplex Protocol NA NA NA NA
•
11-26
1784KL (DH+
Direct)
1784KL Communication
Interface Modules
NA NA NA
•
NA 11-28
1784KT (DH+
Direct)
1784KT Communication
Interface Modules
NA NA NA
•
NA 11-29
1784KT2 (DH+
Direct)
1784KT2 Communication
Interface Module
NA NA NA
•
NA 11-29
1784KT2 (DH+
Bridged)
1784KT2 Communication
Interface Module
• • • •
NA 11-11
Interchange DH+
Direct
see footnote
➁
NA NA NA
•
NA 11-30
Interchange
DH485
see footnote
➂
• • • •
➀
NA 11-32
Interchange DH+
Bridged
see footnote
➁➃
• • • •
NA 11-33
NA= Not Applicable.
➀
An SLC 5/04 processor only can communicate using DH485 protocol through Channel 0 via RS232.
➁
A 1784PCMK, KTX, KT, KT2, or KL interface card is required with this configuration and has to be
configured in the cfg_kt.ini file. See chapter 1 in this manual for details on how to configure this file.
➂
A 1747PIC, 1784KTX interface card, or 1784PCMK card is required with this configuration and has
to be configured in the cfg_kt.ini file. See chapter 1 in this manual for details on how to configure this
file.
➃
Several types of bridging options are available. See page 11-33 for more information.