USER MANUAL APS 6.0

Saving and Compiling a Processor File
9–7
You can apply a unique input filter setting to each of the three input groups.
Function Key Adjusts Inputs
[F1]
0 and 1
[F2] 2 and 3
[F3]
4 to x
➀
➀
For 16 I/O point controllers, x=9.
For 32 I/O point controllers, x=19.
Note The input filter response times for the 1761–L16A WA and 1761–L32AWA micro
contr
ollers ar e fixed at 8ms. Selecting any other input filter r esponse time for these
contr ollers will not change the r esponse time of the inputs. However , your r esponse
times given by your softwar e will not show the actual times. Also, the Input Filter
Modified Bit (S5/13) will be set when the contr
oller is in run or test mode .
For the minimum and maximum response times associated with each input filter
setting, see the MicroLogix 1000 with Pr ogramming Softwar e User Manual , or the
MicroLogix 1000 with Hand-Held Pr
ogrammer User Manual .
Alternate Method of Saving a File
If you press
CONFIG
OFFLINE
CONFIG
RETURN
TO MENU
F3
and you have not saved your program, you will be given the
opportunity to do so. The same prompts and function keys apply to this method of
saving a file.