USER MANUAL APS 6.0

Preface
Advanced Programming Software User Manual
7–14
4. The symbol IN appears above the instruction. Note that symbols are always
displayed in capital letters. Y
ou are now prompted for a symbol relating to
T4:0. Type: eight sec
and press
CONFIG
OFFLINE
CONFIG
NEXT
INSTR
F9
.
] [
Enter symbol
Relate T4:0/DN to
offline no forces File EXAMPLE2
F9
NEXT
INSTR
( )
(EN)
(DN)
TON
TIMER ON DELAY
Timer EIGHT_SEC
Time Base 0.01
Preset 800
Accum 0
END
F10
PREV
INSTR
] [
T4:0
DN
EIGHT_SEC/DN
IN
1
O:2
1
I:1
5. EIGHT_SEC appears within the T ON instruction and also above the XIC
instruction associated with the timer instruction. Note that the Done bit in rung
1 was automatically assigned the symbol EIGHT_SEC/DN. If you choose, you
can assign a dif ferent symbol for the Done bit. For example, type: eight and
press
CONFIG
OFFLINE
CONFIG
NEXT
INSTR
F9
. The following display appears.