USER MANUAL APS 6.0

Installing the Software

1–5

Note If an EMS handler (such as EMM386) is installed, it must follow the EMS 4.0 and

VCPI specifications. If it does not, contact the manufactur

er and obtain the latest

elease. If you ar

e using an EMS handler (or you want to use other switches than

those specified her

e) refer to the

ReadMe

file included with this softwar

e. An

exception is the IBM PC-DOS 4.01, which has an EMS manager that is not VCPI

compatible.

If you ar

e using one of the following EMS memory managers, make certain you use

the switch shown in the example below (or an equivalent):

DEVICE=<path>EMM386 FRAME=NONE

DEVICE=<path>386MAX NOFRAME

DEVICE=<path>386MAX EMS=0

you ar

e using a QEMM memory manager

, make certain you use the switch shown

in the example below (or an equivalent):

DEVICE=

<path>

QEMM386.SYS FRAME=NONE

DEVICE=

<path>

QDPMI.SYS