USER MANUAL APS 6.0

Installing the Software
1–3
Platform Restrictions
If Using a 386/DX33 or Higher Platform
These platforms operate with no restrictions.
If Using a Platform Lower Than 386/DX33
Some restrictions may apply when operating at these platforms depending on the
communication driver you use and its associated baud rate.
When operating at 19200 with an Allen-Bradley T47 or T60, a 386SX, or a similar
computer, the use of EMM386 may slightly degrade network communications, and
may degrade the reliability of APS communications to a network node. For
enhanced communications performance on these computers, we recommend you
remove EMM386 from the CONFIG.SYS file.
For restrictions on other drivers, see the table that follows.
Communication Driver
KF3/KE and DF1
Half-Duplex
Windows 485
(PIC Only)
Baud Rate
Platform
19200 9600 4800 2400 19200 9600
386/DX25
▲   
▲ ▲
386/SX16 ■ ▲
 
■
■
 Communication between the driver and APS is supported with or without an expanded memory manager .
▲ Communication between the driver and APS is only supported without an expanded memory manager .
■
Communication between the driver and APS is not supported.
Note Using a platform lower than a 386/SX16 is not supported online or offline.