QUICK START GUIDE APS 6.0 User Manual

Additional Ladder Program Exercises
A–5
2. Save the file to disk.
Press
CONFIG
OFFLINE
CONFIG
SAVE
F2
. Accept the default Save options by pressing
CONFIG
OFFLINE
CONFIG
YES
F8
.
3. Return to the APS menu.
Press
CONFIG
OFFLINE
CONFIG
RETURN
TO MENU
F3
.
Test the Ladder Program
Complete the following steps to test the processor file:
1. Go online with your processor and restore the new file. Refer to chapter 4 for
help.
2. Monitor the file. Refer to chapter 4 for help.
3. Place the processor in the RUN mode. See chapter 4 for help.
4. Press pushbutton #0. Outputs #1 and #2 turn ON.
5.
Release pushbutton #0. Outputs #1 and #2 turn OFF .
6. Press pushbutton #1. Outputs #1 and #2 turn ON.
7.
Release pushbutton #1. Outputs #1 and #2 turn OFF .