QUICK START GUIDE APS 6.0 User Manual

Preface

APS Quick Start for New Users

3–8

6. Configure the I/O modules.

The cursor is located on slot 1. To configure it, press

CONFIG

OFFLINE

CONFIG

MODIFY

SLOT

. The

following option window appears:

CATALOG CARD DESCRIPTION

1746-I*8 Any 8pt. Discrete Input Module

1746-I*16 Any 16pt. Discrete Input Module

1746-I*32 Any 32pt. Discrete Input Module

1746-O*8 Any 8pt. Discrete Output Module

1746-O*16 Any 16pt. Discrete Output Module

1746-O*32 Any 32pt. Discrete Output Module

1746-IA4 4 - Input 100/120 VAC

1746-IA8 8 - Input 100/120 VAC

1746-IA16 16 - Input 100/120 VAC

1746-IB8 8 - Input (SINK) 24 VDC

1746-IB16 16 - Input (SINK) 24 VDC

1746-IB32 32 - Input (SINK) 24 VDC

Press ENTER to select I/O Module

Enter Module ID Code >

I/O MODULE SELECTION FOR SLOT: 1

SELECT

MODULE

ESC exits

This window allows you to select a module for slot 1. Use the up/down cursor

keys to place the cursor on the appropriate module catalog number

, then press

CONFIG

OFFLINE

CONFIG

SELECT

MODULE

. This returns the display to the I/O configuration window with the

selected module indicated. Cursor down to the next open slot and repeat the

configuration steps.