QUICK START GUIDE APS 6.0 User Manual
Preface
APS Quick Start for New Users
1–10
Running APS
To run APS, follow these steps;
1.
If necessary
, change the drive specified to the drive where the software is
installed (typically C). To do this, type:
C:
and press
[ENTER].
2. If you are using the default directory, at the DOS prompt, type:
CD \IPDS\ATTACH\SLC500
and press
[ENTER].
If you specified a different directory path, enter that directory instead.
3. Type: AP
and press
[ENTER]. The main APS menu appears.
F6
SYSTEM
CONFIGR
F5
WHO
F4
OFFLINE
CONFIG
F3
OFFLINE
PRG/DOC
Fri. Nov. 3, 1995 Current Offline File: 09 11:03:09 am
TERM Address: 0 Current Device: 1747-PIC (DH-485) PROC Address: 1
Press a function key
F1 F2 F7
ONLINE ONLINE
CONFIG
FILE
OPTIONS
SLC-500 ADVANCED PROGRAMMING SOFTWARE
Rockwell Software Incorporated, Copyright 1989-1995
9323-PA2E
All Rights Reserved
This software is licensed to: Your name
Your company name
0000000000
F9 F10F8
SYSTEM
UTILS
EXIT
SYSTEM
PRINT
REPORTS
Display Area
Message Prompt Data Entry Status Main Functions