Software Owner's manual

Page | 48

The green Status LED is flashing

Itindicatessensorwiring(shortcircuitoropencir‐

cuit)orinternalfault.



Seedescriptioninchapter 

171H171H171H3toidentify

faultsour ce.



The DC output is incorrect

1 Ensuretheinputtypeandrangeareconfigured

asrequiredandwiringconnectionsarecorrect.

2 Checktheoutputconfigurationsettingsforcor‐

rectrangeandtransferfunctionsincludingdirect

orre‐verseaction.



The alarm relays have no function

1 Checktherelayconfigurationsettingsincluding

set‐point,alarmtypeareasrequiredandasde‐

scribedinchapter

172H172H172HError!Referencesourcenot

found..

2 Checktheinputtypeandrangeisasrequired.

3 Checktheinputconnectionsaremadecorrectly.



The alarm relays are on / off with the wrong

values of input