Software Owner's manual

Page | 43
7.6 Run mode
Startcommunicationwiththe931U‐C9C7C‐BC
1 Connectthe931U‐C9C7C‐BCtoaPowersupply.
2 Connectthe931U‐C9C7C‐BCwiththe931U‐
CABLEtoanavailableUSBportonthePC.
3 Startthe931U‐C9C7C‐BCConfiguratorSoftware.
4 Inputconfiguration
Selecttheinputvalue.
5 Outputconfiguration
Selecttheoutputvalue.
6 Alarmconfiguration
Setthealarmrelaybehaviour.
7 Sendconfigurationto931U‐C9C7C‐BC.
Thebutton"SavetoInstrument”transmitsthe
newconfigurationtothe931U‐C9C7C‐BC.
8 EnterPassword
Enteryourpassword(thedefaultpasswordis
0000).
9 ReadValues
Withthebutton"ReadValues”theactualvalues
ofthe931U‐C9C7C‐BCaredisplayedinthewin‐
dow"Runningvalues”.
Ifthebutton"ReadContinuous”isactivatedthe
valuesareupdatedeverysecond(monitoring).
10 ReadfromInstrument
Tocheckthecurrentconfigurationinthecon‐
nected931U‐C9C7C‐BCclickonthe"Readfrom
instrument”button.

Running values
• Input:931U‐C9C7C‐BCinputvalueinpercent.
• Output:931U‐C9C7C‐BCoutputvalueinpercent.
• CJCTemperature:Thisthetemperature inCenti ‐
gradeor
Fahrenheitatthecoldjunctionpointin
the931U‐C9C7C‐BC.
• Alarm1:Showsthestatusofthefirstalarmrelay
- LED=red=relayswitchedon(alarm)
- LED=off=relayswitchedoff(noalarm)