GETTING STARTED Owner manual

Setting Up DeviceNet Direct Communications 9-11

Mapping the Configured Driver to the KTPort Value

After configuring the driver, you must map it to a legacy INTERCHANGE API

xKT:0 label in RSLinx. To map the configured driver, you need to:

In the

Communications

menu, select

Configure Client Applications

. The

Configure Client Applications

dialog box appears.

In an unused

KT:0

field, select the DeviceNet driver.

Important:

Note the KT:0 field that you select. When you configure a

DriveTools32 application, you need to enter the field number in the

Communication Setup

dialog box.

Click