GETTING STARTED Owner manual

9-10 Setting Up DeviceNet Direct Communications
5.
Double-click the type of adapter that you are using to connect your
computer to the DeviceNet network. A
Device Configuration
dialog box
appears.
6.
Under
Serial Port Setup
, select the communications port and the data rate
that you are using in the computer.
7.
Under
DeviceNet Port Setup
, select a unique node address for the
computer on the DeviceNet network and the DeviceNet network data rate.
8.
Click
OK
to configure the driver. The
Add New RSLinx Driver
dialog box
appears.
9.
Type a name, and then click
OK
. The new driver appears in the
Configure
Drivers
dialog box.
10.
Click
Close
.