Manualshelf

GETTING STARTED Owner manual

ManualsBrandsRockwell Automation ManualsEquipment9303 DRIVE TOOLS 32 VER 2.50
919293949596979899100
Setting Up DeviceNet Direct Communications 9-9
Configuring the Communications Driver
A driver is the software interface to the hardware device that allows RSLinx to
communicate with your drive. To configure the driver, you need to:
1.
Start RSLinx.
2.
In the
Communications
menu, select
Configure Drivers
. The
Configure
Drivers
dialog box appears.
3.
In the
Available Driver Types
field, select
DeviceNet Drivers
.
4.
Click
Add New
. The
DeviceNet Driver Selection
dialog box appears.