GETTING STARTED Owner manual

5-10 Setting Up DH+ Direct Communications
8.
If you are using a 1336 FORCE and its drive firmware version is 0.10,
select
1336T Two Word Header (used ONLY for 1336T version 0.10)
.
9.
Click
OK
.
Connecting to the Drive
After configuring RSLinx and the DriveTools32 application, you are ready to
connect to the drive.
1.
In the
Drive
menu, select
Connect to Drive
. The
DF1(KF2...) to Other
Network (DH+...)
dialog box appears.
2.
Click
WHO
. The
WHO’s active on DF1 to DH+ network
dialog box
appears.
3.
Double-click the station to which you want to connect.
The DriveTools32 application is now communicating with the drive. If you are
prompted to create a new database, click
Ye s
.
Important:
If a prompt appears to alert you that the application failed to
communicate with the drive, refer to Chapter 16,
Troubleshooting
.