GETTING STARTED Owner manual

Installing and Starting DriveTools32 2-3
Installing RSLinx
You must have version 2.10.118 (or greater) of RSLinx or RSLinx Lite installed
and properly configured before you can use DriveTools32 to communicate with
a drive. It is recommended that you also install RSLinx Service Pack 1 to update
RSLinx to version 2.10.167. When you finish installing DriveTools32, you are
prompted to install RSLinx Lite and the necessary service packs.
Important:
If you already have RSLinx (version 2.10.118) installed on the
computer, do not install the RSLinx that is shipped with DriveTools32. Click
No
.
If you need to install RSLinx, follow these directions:
1.
Click
Ye s
to display the RSLinx Install wizard.