GETTING STARTED Owner manual

A-2 Products Supported by DriveTools32
Other Supported
Drives
The following table lists drives commonly used with DriveTools32. These drives
are not accessed via SCANport.
Tool Connectivity
The following table indicates the products, supported types of communications
and tools that work with each. A “Y” indicates the option is supported.
Bulletin Number Product
Directory
➀
160 160 Drive with 160-RS1 Adapter D_1A
1395 1395 DC Drive D_1395
1352s A-B/Stromberg Standard Drive D_1352s
1352v A-B/Stromberg AC Vector Drive D_1352v
3400 A-B/Stromberg Digital DC Drive D_3400
3502 A-B/Stromberg LGU Drive D_3502
➀
During the installation, DriveTools32 loads these directories in the following location:
C:\Program Files\Rockwell Automation\DriveTools32\Program.
Device Connection Method
DriveManager32
DriveMonitor32
DrivePanel32
DriveTrending32
DriveBlockEditor32
160 SSC
RS-232 Point-to-Point Serial
Modem
Y
Y
Y
Y
SCANport-
Compatible Products
1305, 1336 FORCE
with Standard Adapter
Board, 1336 IMPACT,
1336 PLUS, 1336
PLUS II, 1336 REGEN,
1336 SPIDER, 1397,
1557, 2364F RGU,
SMC, and SMP
RS-232 Point-to-Point Serial
RS-232 Multi-Drop using ControlNet or DeviceNet
RS-232 to DH+ (direct)
DH+ to RIO Pass Thru
DH+ (direct)
RS-232 to ControlNet Direct
ControlNet (direct)
RS-232 to ControlNet to RIO Pass Thru
ControlNet to RIO Pass Thru
RS-232 to DeviceNet Direct
DeviceNet (direct)
Ethernet to RIO Pass Thru
RSLinx Gateway Server:
- Ethernet to DH+ (direct)
- Ethernet to DH+ to RIO Pass Thru
- Ethernet to ControlNet Direct
- Ethernet to RS-232 Point-to-Point Serial
Modem
ControlLogix Gateways
ControlLogix Gateways to RIO Pass Thru
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
➀
Y
Y
➀
➀
Y
Y
➀
➀
Y
Y
Y
➁
➁
➁
➁
➁
➁
➁
➁
➁
➁
➁
➁
➁
➁
➁
➁
➀
Program and display only (no control functions)
➁
1336 FORCE and 2364F RGU only.
➂
Also supports connection methods supported by SCANport-Compatible Products. Refer to page A- 2.