GETTING STARTED Owner manual

Appendix
A
Products Supported by DriveTools32
Appendix
Objectives
Appendix A lists the bulletin numbers of SCANport-compatible products, their
product names, and the directories in which DriveTools32 saves their databases.
Supported
SCANport-
Compatible
Products
The following table lists SCANport-compatible products:
Important:
DriveTools32 can support more SCANport-compatible products
than are listed in the above table by creating database files for them. For more
information on creating databases, refer to the “DriveTools32 and Database
Files” section in Chapter 2,
Installing and Starting DriveTools32
.
Bulletin
Number
Product
Directory
➀
1305 1305 AC Drive D_1305N
1336E 1336 IMPACT™ AC Drive D_1336E
1336S 1336 PLUS AC Drive (Fractional) D_1336F
1336S 1336 PLUS AC Drive (B-frame or above) D_1336HP
1336T 1336 FORCE AC Drive with a Standard Adapter Board D_1336TS
1336GT1EN 1336 FORCE with a PLC Communications Adapter Board D_1336TP
1336T-GT3EN 1336 FORCE with a ControlNet Communications Adapter Board D_1336TC
1397 1397 DC Drive D_1397
1557 1557 Medium Voltage AC Drive D_1557
2364F 2364F RGU DC Bus Regen Front End D_2364F
1336F 1336 PLUS
II
D_07
1336Z 1336 SPIDER D_07
1336R 1336 REGEN Line Regeneration Package D_193
150 SMC Dialog Plus™ D_150
193 SMP-3 D_193
➀
During the installation, DriveTools32 loads these directories in the following location:
C:\Program Files\Rockwell Automation\DriveTools32\Program.