GETTING STARTED Owner manual

13-8 Using ControlLogix Gateways
Setting Up
Communications
in a DriveTools32
Application
Before a DriveTools32 application can communicate with a drive, you must
configure the application. To do so, you need to:
1.
Start the DriveTools32 application.
2.
In the
Options
menu, select
Communication Setup
. The
Communication
Setup
dialog box appears.
3.
Click the
ControlLogix Gateway Using Shortcut
tab.
4.
Under
Connect Type
, select the connection type according to the number
of backplanes that you are using.
Important:
Backplanes can be viewed in the RSWho Window when you are
creating your shortcut.
5.
In the
Enter INTERCHANGE Port Mapping #
field, type the number of
the KT:0 port used by the shortcut in the RSLinx
Configure Client
Applications
dialog box.
Important:
To view the KT Port number used by the shortcut, select
Configure
Client Applications
in the RSLinx
Communications
menu.
Number of Backplanes Select
One Single ControLogix Gateway
More than one Multiple ControlLogix Gateway