Manualshelf

GETTING STARTED Owner manual

ManualsBrandsRockwell Automation ManualsEquipment9303 DRIVE TOOLS 32 VER 2.50
131132133134135136137138139140
Using ControlLogix Gateways 13-7
Mapping the Configured Driver to the KTPort Value
After configuring the driver, you must map it to a legacy INTERCHANGE API
xKT:0 label in RSLinx so that DriveTools32 can use it. To map the configured
driver, you need to:
1.
In the
Communications
menu, select
Configure Client Applications
. The
Configure Client Applications
dialog box appears.
2.
In an unused
KT:0
field, select the shortcut that you created.
Important:
Note the KT:0 field that you select. When you configure a
DriveTools32 application, you need to enter the field number in the
Communication Setup
dialog box.
3.
Click
OK
to map the driver to the KT:0 value.