Manualshelf

GETTING STARTED Owner manual

ManualsBrandsRockwell Automation ManualsEquipment9303 DRIVE TOOLS 32 VER 2.50
121122123124125126127128129130
Using ControlLogix Gateways 13-5
6.
In the
Server’s IP Address or hostname
field, type the IP address for the
Ethernet module in the ControlLogix controller.
7.
Click
OK
. The Configure Drivers dialog box reappears, and the new driver
is running.
8.
Click
Close
to close the dialog box.
Creating a Shortcut
After you create a communication driver to connect to the ControlLogix
controller, you must create a shortcut to the network on which the drive is
located.
1.
In the
Communications
menu, select
RSWho
. The
RSWho
window
appears.
2.
Verify that
Autobrowse
is selected in the upper left corner. Its box should
be checked.
ControlNet
DH+
DeviceNet
Ethernet